Folding Design Brief: In this design complete Agitator Being Folded. There are two segments for each stage; PTFE lined Shaft & PFA Lined Impellers.
Advantages of Folding Design:
Above Image represent 3-Stage 3-Blagdes CS Fabricated PTFE + PFA Lined Agitator. (CS PTFE Agitator)
Our engineers are able to design impellers in Radial Blade (90°) or Pitch Blade (45°). In Pitch blade design we can develop Up Pumping or Down Pumping Manners As per User applications.
Our Technical Team also provides Torque Rating, Bending Moment based on RPM of the shaft & Motor Speed; it makes easier to recognize for suitable working conditions.
We can also able to replace only Impellers from CSGL Agitator. In CSGL Agitators sometimes Blades become damage due to high rotational torque; so our experts can be replace Impellers by PFA Lining. In Such case Hest Alloy ‘c’ Sleeves also become damage due to High rotational friction; we can replace also Hest Alloy ‘C’ Sleeve with respect to single or double mechanical seal.
Our Engineers also guide for Installation and working after delivery at your sight by checking Run out and Shaft RPM.
5 MM – 6 MM
Transfer Lining & Sleeve Lining.
Design Temperature: 200° C & Working Temperature: 180°C.
Torque (T) Bending Moments will be available after understanding User requirement & Detail.
For Impellers Sweep ø (Swing Over): 750 MM to 1100 MM. (Above 1100 MM Sweep ø Extenders are available to achieve)
Shaft Length: As per user requirement.
Spark Test: 15 KV to check isolate metallic contacts after lining.
Suitable for Full Vacuum -1 BAR to high pressure +6 BAR.