lg-1 hi flon

CS Fabricated PTFE Lined Shell


We offer various range in CS Fabricated PTFE Lined Shell as shown in above image. CS Fabricated PTFE Lined Shells are widely used in Fluid Transfer solutions and transportation of highly corrosive fluids.

Our engineers are able to design CS PTFE Lined Shell as per user request. We also provide all the accessories related to working like Thermo-well for Temperature sensing Hest Alloy ‘c’ or Tantalum Tip, Drop Tube For Fluid Addition as per application.

Our Technical Team also provides Physical properties Like Pressure Rating, Vacuum Rating, Temperature Rating, Heat Transfer Rate, Thermal Conductivity so it makes easier to recognize for suitable working conditions.

For new development our experts are also provide process data sheet for User requirement & propose best suitable advice and GA drawing for first approval.

Kindly Note: Process Data Sheet will be available on request.

We can also able to replace CSGL Shell into CSPTFE Lined Shell.

Our Engineers also guide for Installation and working after delivery at your sight by obtaining results.

PTFE Sheet Lining & Transfer Molding.

Design Temperature: 200° C & Working Temperature: 180°C.
Pressure : +6 BAR
Vacuum : -1 BAR (Mushroom Joints Or Graphite Sleeve Required)

300 NB to 500 NB: PFA Lining Above 500 NB: PTFE Sheet Lining Process. (Mushroom Joints require when undergoes full vacuum)

Spark Test: 15 KV to check isolate metallic contacts after lining.

Suitable for Full Vacuum -1 BAR to high pressure +6 BAR.

Contact-left-arrow hi flon

Let's Start
Something Great!

We are a full-service creative agency
Get in touch hi flon 4 hi flon
2, Laxmivarsha Complex,Nr. Ramji Temple, Sabarmati,Ahmadabad – 380005.
All Rights Reserved | Design By