lg-1 hi flon

CS Fabricated PTFE Lined & Antistatic
PTFE Lined Elbows

2. CS PTFE Lined Elbows hi flon

CS Fabricated PTFE Lined & Antistatic PTFE Lined Elbows

We provide a variety of CS-PTFE/Antistatic PTFE-lined Elbows and Jacketed Elbows are helps to change direction of fluid flow systems. On the pipe rack of chemical facilities, CS PTFE-Lined Elbows are used to transmit fluid flow of corrosive chemicals at high temperatures. By Hi-ExtuFlon/Hi-IsoFlon process group of manufacture, we can provide and execute functional designs suitable to the user’s application.

In accordance with the new plant design and pipe layout, our piping engineers and product development engineers analyze the best-suited design with a minimum of flange joints by its GAD for the process of applications. Physical fitness is ensured by our QC engineers determining acceptable working circumstances such as pressure rating, vacuum sustainability, and temperature suitability. Erection guidance is also provided to ensure the quality of the long-term outcome.

In addition, lining vents as per pipe standards are provided in each segment to evaluate user fouling of the pipe segments over long-term usage. Based on various processes to fluid addition we have different design to develop. In certain cases, CS PTFE-Lined stub end Elbows of long or short radius of 90°/45° are provided on user request. On Specialized request we offer PFA lined elbows as well in the same.

Benefits and Features of Hi-Flon Design:

  1. Ball Passed PTFE Lining possible without throat formation.
  2. Assured for Full Vacuum (-1 BAR) to Pressure (10 BAR).
  3. PTFE lining Thickness : 5 MM±1 MM
  4. Easy-to-use PTFE lining.
  5. Reliable construction of MS Fabricated PTFE Lined Elbows against aggressive chemicals at high temperatures.
  6. On user request, Antistatic PTEF lined Elbows requires to be possible.
  7. Providing Vents to evaluate lining foul during its application.

Product development is subject to ASA#150 and IS2062 SCH-40 for shell and lining conformance to ASTM F1545.

PTFE & Antistatic PTFE

4-10 MM according to the application

CS-PTFE/Antistatic PTFE-lined Elbows & Jacketed Elbows

  1. Design temperature: 200 °C; working temperature: 180°C.
  2. Pressure: 6 BAR
  3. Vacuum: -1 BAR (Achieved by our mechanical interlocked lining technique)

15 NB to 300 NB

  1. Spark Test: 15 KV to check for isolated metallic contacts after lining.
  2. Hydrostatic Pressure Test: 7.5 Kg/Cm².

We offer various range in CS Fabricated PTFE Lined Elbow or Antistatic PTFE Elbow in 45° & 90° as shown in above image. CS Fabricated PTFE Lined Elbows are widely used in Highly Corrosive Piping System.

PTFE Lined Elbow will have One Fix end and other end stub end with loose flange.

Complete Development Subject to ASA # 150 Standards and Flange IS 2062 In Compliance with ANSI B 16.5 and Also available in DIN size on request.

PTFE & CPTFE (Antistatic PTFE)
3.2 MM – 5 MM
Flare Lining & Isostatic Lining
Design Temperature: 200° C & Working Temperature: 180°C. Pressure : +6 BAR

25NB to 300 NB: PTFE Lining.

Also available in Jacketed Design.

Spark Test: 15 KV to check isolate metallic contacts after lining. Suitable For Full Vacuum -1 BAR to high pressure +6 BAR.
Contact-left-arrow hi flon

Let's Start
Something Great!

We are a full-service creative agency
Get in touch hi flon 4 hi flon

E-503, Sumel-11, Nr Namaste Circle, Shahibaugh, Ahmedabad-380004, Gujarat.

CS Fabricated PTFE Lined & Antistatic PTFE Lined Elbows

CS Fabricated PTFE Lined & Antistatic PTFE Lined Elbows

All Rights Reserved | Design By