CS Fabricated PFA & PTFE Lined Vacuum System

We offer various range in CS Fabricated PFA & PTFE Lined Vacuum Systems as shown in above image. CS Fabricated PFA & PTFE Lined Ejector & Suction Chamber Assembly is widely used in Highly Corrosive Vacuum System.

Our engineers are able to design CS PTFE Lined Ejector, CS PFA Lined Ejector and CS Antistatic PTFE Lined Ejector as per user applications.

Our Technical Team also provides Physical properties Like Pressure Rating, Vacuum Rating, Temperature Rating, Heat Transfer Rate, Thermal Conductivity so it makes easier to recognize for suitable working conditions.

Complete Development Subject to ASA # 150 Standards and Flange IS 2062 In Compliance with ANSI B 16.5 and Also available in DIN size on request.

For new development our experts are design process data sheet for User requirement & propose best suitable advice and GA drawing for first approval.

Kindly Note: Process Data Sheet will be available on request.

Our Engineers also guide for Installation and working after delivery at your sight by obtaining results.

PTFE & PFA

Transfer Molding & Iso-static Lining.

25NB to 400 NB: PFA Lining
25 NB to 250 NB: PTFE & Antistatic PTFE Lining

5 MM – 6 MM

Design Temperature: 200° C & Working Temperature: 180°C.
Pressure : +6 BAR
Vacuum : -1 BAR

Spark Test: 15 KV to check isolate metallic contacts after lining.
Suitable for Full Vacuum -1 BAR to high pressure +6 BAR.

Let's Start
Something Great!

We are a full-service creative agency

Location
2, Laxmivarsha Complex,Nr. Ramji Temple, Sabarmati,Ahmadabad – 380005.

EMAIL
hiflon.ptfe@gmail.com

CALL US
+91 9898268904 | +91 7016343623